Common Sense RC Lectron Pro 7.4V 7600mAh 75C Lipo Battery Bare Leads

This 2-cell 7600mAh 75C lipo is perfect for 1/10 scale cars, trucks, and buggies! Consists of a Traxxas port on the discharge leads.
Specifications

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 329 g

This product compliments the main item below.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to connect in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protected favorable locking spring loaded terminals for consistent
    contact
Multiple locking barbs keep terminals secure

CONSISTS OF:
Two black male plastic adapters
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

You will certainly enjoy this product if you have the product just above stated.



This is the Venom Traxxas Male to Charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a battery charger with 4mm
    input jacks
12 AWG wire

CONSISTS OF:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Adapter

Get this product to boost the one you are reading about.



This is the Hitec X2 A/C Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V A/C source of power
10A power supply
0.1-10A adjustable charge present for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a complete charge
10 programmable profile settings for each channel
Allows remote control via mobile phone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software application permits monitoring pack voltage, cell voltage
    and other data via desktop computer, along with starting and
    upgrading firmware
LiPo battery meter
Battery internal resistance meter
One year restricted guarantee from the date of purchase through HITEC
    RCD U.S.A, INC

CONSISTS OF:
X2 A/C Plus Double Input Battery Charger, A/C Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

REQUIRES:
A/C input or 11-18V DC input

SPECIFICATIONS:
Charge Current Range: 0.1-10.0 amps
Maximum Charge Output: A/C 100W / DC 100W x 2
A/C Input: 100-240V A/C
DC Input: 11-18V DC
Overall Charge Circuit Power: 100W A/C, 200W DC Input
Discharge Current Range: 10W x 2
Release Existing Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Range: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15pounds (975g)
Dimensions: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)