Common Sense RC Lectron Pro 7.4V 7600mAh 75C Lipo Battery Bare Leads

This 2-cell 7600mAh 75C lipo is perfect for 1/10 scale vehicles, trucks, and buggies! Includes a Traxxas port on the discharge leads.
Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 329 g

This thing praises the main item here.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it impossible to connect in reverse
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Protected positive locking spring packed terminals for constant
    contact
Multiple locking barbs keep terminals secure

INCLUDES:
2 black male plastic ports
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

You will certainly enjoy this thing if you have the thing previously pointed out.



This is the Venom Traxxas Male to Battery charger Adapter.

FEATURES:
Links a battery with a Traxxas Female plug to a charger with 4mm
    input jacks
12 AWG wire

INCLUDES:
9.25" (235mm) wire lead with 4mm banana plugs and Traxxas Male
    Connector

Get this thing to enhance the one you are reading around.



This is the Hitec X2 AC Plus Dual Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Dual inputs with two independent circuits
Powered by either 11-18V DC or 100-240V AC source of power
10A power supply
0.1-10A adjustable charge current for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, comes to a head batteries 1-3 times in a
    row to make sure a full charge
Ten programmable profile settings for each channel
Permits remote control through smartphone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software permits monitoring pack voltage, cell voltage
    and other information through personal computer, as well as starting and
    upgrading firmware
LiPo battery meter
Battery internal resistance meter
One year restricted service warranty from the date of purchase through HITEC
    RCD U.S.A, INC

INCLUDES:
X2 AC Plus Dual Input Battery Battery charger, AC Power Cord, Universal
    Balancing Board, Balance Adapter, two 18AWG Charging Cables

NEEDS:
AC input or 11-18V DC input

SPECS:
Charge Current Variety: 0.1-10.0 amps
Optimum Charge Output: AC 100W / DC 100W x 2
AC Input: 100-240V AC
DC Input: 11-18V DC
Total Charge Circuit Power: 100W AC, 200W DC Input
Discharge Current Variety: 10W x 2
Discharge Current Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15pounds (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)