Common Sense RC Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is perfect for 1/10 scale cars, trucks, and buggies! Features a big capability for prolonged run times and an enormous C score so you'll have all the power you'll ever need. Includes a Deans-type connector on the discharge leads.
Features

High-end performance and reliability at a budget-friendly cost
Perfect for 1/10 scale cars, trucks, and buggies
Features a big capability for prolonged run times and an enormous C score so you'll have all the power you'll ever need
Includes a Deans-type connector on the discharge leads

Specifications

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g

This product is often gotten with the above mentioned product.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Developed to be user-friendly to operate
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both AC and DC power choices
One year product service warranty against maker problems (through the maker - Racers Edge)

Includes:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Needs:
Compatible battery

Specifications
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Present: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm

The below product also pairs really well with the product being reviewed.



This is the brushless electrical powered, 2.4GHz radio managed,
prepared to run HPI Savage XS Flux Mini Beast Truck.

FEATURES:
Chassis: Plastic TVP (twin vertical plate)
Drive: 4 wheel shaft
Brushless Motor: HPI Flux Vektor 4000 with aluminum motor plate
Radio: 2.4GHz with SF10W waterproof steering servo
Electronic Speed Control: HPI Flux Vapor Pro with reverse and
    cooling fan, programmable with optional Programs Kit (HPIC0573),
    not included
Transmission: All metal gears working on rubber-sealed ball bearings
Differential: Geared up with 4 machined extremely sturdy bevel
    gears
Slipper Clutch: Dual pad
Pinion Equipment: Constructed of steel 28 tooth, 48 pitch
Drive Equipment (spur gear): 49T
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 2.2" (56mm)
    diameter
Tires: GT-2 on/off-road with blocky tread pattern and durable
    sidewall teeth, 3.93" (100mm) diameter, 2.3" (60mm) wide
Shocks: Plastic bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in describes the
    angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Body: Cut and painted GT2XS
Warranty: 2 year minimal service warranty through HPI starting at date of
    purchase. Warranty valid just in the USA, Canada and South America

CONSISTS OF:
Put together HPI Savage Flux Mini Beast Truck with Flux Vektor 4000
    Brushless Motor, Vapor Pro ESC, 2.4GHz Radio System, SF-10W
    Waterproof Steering Servo, Painted & Trimmed Body and Direction
    Handbook

NEEDS:
AA Batteries: 8 for transmitter
Battery: 2S or 3S LiPo
Battery Charger: LiPo compatible
Building and track devices

SPECS:
Vehicle-
Length: 14.1" (360mm)
Width: 11" (280mm)
Wheelbase: 8.8" (225mm)
    Body-
Length: 13" (330mm)
Width: 5.7" (146mm) at widest point
Height: 3.7 (93mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
4 5x11mm Fr Uprights 2 DTXC1547
2 5x11mm Fr Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 10x15mm Center Shaft 1 DTXC1595
2 5x11mm Idler Equipment 1 DTXC1547