Common Sense RC Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is best for 1/10 scale cars, trucks, and buggies! Functions a huge capability for prolonged run times and a massive C score so you'll have all the power you'll ever need. Consists of a Deans-type adapter on the discharge leads.
Features

High-end performance and dependability at an inexpensive cost
Perfect for 1/10 scale cars, trucks, and buggies
Functions a huge capability for prolonged run times and a massive C score so you'll have all the power you'll ever need
Consists of a Deans-type adapter on the discharge leads

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g

This item is frequently gotten with the above discussed item.



This is the Racers Edge EZ80 Air Conditioning DC Multi-Chemistry Charger.

Features:

Developed to be intuitive to operate
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both Air Conditioning and DC power alternatives
One year product warranty versus producer flaws (through the producer - Racers Edge)

Consists of:
One Racers Edge EZ80 Air Conditioning DC Multi-Chemistry Charger

Requires:
Suitable battery

Requirements
Input Voltage Air Conditioning: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Current: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm

The listed below item also sets truly well with the item being talked about.



This is the brushless electric powered, 2.4GHz radio controlled,
prepared to run HPI Savage XS Flux Mini Monster Truck.

FEATURES:
Chassis: Plastic TVP (twin vertical plate)
Drive: Four wheel shaft
Brushless Motor: HPI Flux Vektor 4000 with aluminum motor plate
Radio: 2.4GHz with SF10W water resistant steering servo
Electronic Speed Control: HPI Flux Vapor Pro with reverse and
    cooling fan, programmable with optional Programs Set (HPIC0573),
    not consisted of
Transmission: All metal gears running on rubber-sealed ball bearings
Differential: Equipped with four machined extremely sturdy bevel
    gears
Slipper Clutch: Double pad
Pinion Gear: Constructed of steel 28 tooth, 48 pitch
Drive Gear (stimulate equipment): 49T
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 2.2" (56mm)
    size
Tires: GT-2 on/off-road with blocky tread pattern and sturdy
    sidewall teeth, 3.93" (100mm) size, 2.3" (60mm) large
Shocks: Plastic bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Body: Cut and painted GT2XS
Warranty: 2 year limited warranty through HPI beginning at date of
    purchase. Warranty legitimate just in the USA, Canada and South America

CONSISTS OF:
Assembled HPI Savage Flux Mini Monster Truck with Flux Vektor 4000
    Brushless Motor, Vapor Pro ESC, 2.4GHz Radio System, SF-10W
    Waterproof Steering Servo, Painted & Trimmed Body and Direction
    Manual

NEEDS:
AA Batteries: 8 for transmitter
Battery: 2S or 3S LiPo
Battery Charger: LiPo suitable
Structure and track devices

SPECIFICATIONS:
Car-
Length: 14.1" (360mm)
Width: 11" (280mm)
Wheelbase: 8.8" (225mm)
    Body-
Length: 13" (330mm)
Width: 5.7" (146mm) at best point
Height: 3.7 (93mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set
4 5x11mm Fr Uprights 2 DTXC1547
2 5x11mm Fr Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 10x15mm Center Shaft 1 DTXC1595
2 5x11mm Idler Gear 1 DTXC1547