Common Sense RC Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is ideal for 1/10 scale automobiles, trucks, and buggies! Features a big capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need. Includes a Deans-type port on the discharge leads.
Features

High-end efficiency and dependability at a cost effective cost
Perfect for 1/10 scale automobiles, trucks, and buggies
Features a big capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need
Includes a Deans-type port on the discharge leads

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g

This item is frequently bought with the above mentioned item.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Designed to be user-friendly to operate
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both AC and DC power alternatives
One year product warranty against producer flaws (through the producer - Racers Edge)

Includes:
One Racers Edge EZ80 AC DC Multi-Chemistry Battery charger

Requires:
Suitable battery

Requirements
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Existing: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm

The below item likewise pairs really well with the item being gone over.



This is the brushless electrical powered, 2.4GHz radio managed,
all set to run HPI Savage XS Flux Mini Monster Truck.

FEATURES:
Chassis: Plastic TVP (twin vertical plate)
Drive: Four wheel shaft
Brushless Motor: HPI Flux Vektor 4000 with aluminum motor plate
Radio: 2.4GHz with SF10W water resistant steering servo
Electronic Speed Control: HPI Flux Vapor Pro with reverse and
    cooling fan, programmable with optional Shows Kit (HPIC0573),
    not consisted of
Transmission: All metal equipments running on rubber-sealed ball bearings
Differential: Equipped with four machined very heavy duty bevel
    equipments
Slipper Clutch: Double pad
Pinion Gear: Constructed of steel 28 tooth, 48 pitch
Drive Gear (spur gear): 49T
Wheels: HPI Warlock, chrome surface, width: 2.2" (56mm), 2.2" (56mm)
    diameter
Tires: GT-2 on/off-road with blocky tread pattern and sturdy
    sidewall teeth, 3.93" (100mm) diameter, 2.3" (60mm) large
Shocks: Plastic bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
    angle of the front suspension when viewed from the side of the automobile
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Body: Cut and painted GT2XS
Service warranty: 2 year restricted warranty through HPI starting at date of
    purchase. Service warranty valid only in the USA, Canada and South America

CONSISTS OF:
Put together HPI Savage Flux Mini Monster Truck with Flux Vektor 4000
    Brushless Motor, Vapor Pro ESC, 2.4GHz Radio System, SF-10W
    Waterproof Steering Servo, Painted & Trimmed Body and Direction
    Manual

NEEDS:
AA Batteries: Eight for transmitter
Battery: 2S or 3S LiPo
Battery Battery charger: LiPo suitable
Building and track equipment

SPECS:
Vehicle-
Length: 14.1" (360mm)
Width: 11" (280mm)
Wheelbase: 8.8" (225mm)
    Body-
Length: 13" (330mm)
Width: 5.7" (146mm) at largest point
Height: 3.7 (93mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
4 5x11mm Fr Uprights 2 DTXC1547
2 5x11mm Fr Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 10x15mm Center Shaft 1 DTXC1595
2 5x11mm Idler Gear 1 DTXC1547