Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for lots of applications, and is a great option for lots of smaller sized drones and airplanes! Features a JST port on the discharge leads and basic JST-XH balance leads. 40C continuous discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Regularly acquired with the product that you are presently checking out.

IC3 Battery to JST PH2.0 Device

Specs

Accessory Type: Connectors & Adapters

Want one more wonderful product to match the above stated product?

SCX24 Motor w/ Pinion

Want one more wonderful product to match the above stated product?

USB Charger LiPo

Here is a wonderful product that several others have bought at the exact same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Sensible narrow-stance rock spider body in olive green or red
• Molded roll cage with practical light bar
• Sensible motorist figure and lots of other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and durability
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles include a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated tank and long lasting plastic suspension links provide tested Axial crawling efficiency
• Front and rear differentials each home a worm gear setup to power the axles and create higher ground clearance. Worm gear drive likewise provides a low gear ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to bring on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to take on hard climbs and rough trails. Like the bigger SCX10™ chassis, this smaller sized variation uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charm on the trails. Take a look at that Deadbolt body — with its narrow stance, bulging hood, practical motorist figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% total and all set to run. Whatever required for action is in package: assembled and ended up automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to assist rise steep climbs. It's mated to a steel motor install to keep flex to a minimum, which assists protect the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running throughout hard climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling efficiency you've understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, formed plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the back which is optimized to reduce axle guide and torque twist. We've likewise consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and function sensational scale details, despite the small scale.
The officially accredited Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road efficiency while still keeping exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board parts. You can rapidly reach the battery and chassis by removing just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size doesn't suggest the features require to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that enables steering accuracy, while likewise offering defense for the servo equipments in case of a bind or impact.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No