Common Sense RC Lectron Pro 7.4V 2000mAh 50C Lipo Battery with Mini Connector fo

This 2-cell (7.4 volt) Lithium Polymer 2000mAh battery pack was developed specifically to be the perfect size, shape and weight for Dromida Speed Series 1/18 scale brushless automobiles. 50C continuous discharge rate of 100 amps. Includes Dromida port on the discharge leads.
Suitable Automobiles:

DB4.18BL
DT4.18BL
BX4.18BL
MT4.18BL
SC4.18BL

Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm
Weight: 93 g

Likewise readily available with Traxxas, Deans or EC3 connectors!
Important Notes:

Usage only with automobiles with brushless power systems and make sure your low voltage cutoff (LVC) is turned on. Brushed power systems typically do not include an LVC and therefore present a risk of permitting lipo batteries to run down too low and harmful them.
Usage only with chargers developed specifically for lithium polymer (lipo) batteries. DO NOT ACCUSED OF THE CHARGER THAT COMES STOCK WITH DROMIDA SPEED SERIES VEHICLES. The chargers that feature many automobiles (including the Dromida Speed Series) are only developed for use with nickel metal hydride (NiMH) batteries and are not safe for use with lipo batteries. Charging lipo batteries in NiMH mode positions a severe fire threat and should never ever be tried.

You will enjoy this product if you have the product just above mentioned.

Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for use with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and many other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

INCLUDES:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

NEEDS:
Linking between battery and battery charger

The listed below item also sets really well with the item being talked about.



This is the Brushless Electric Powered, Radio Controlled, 1/18 scale
RTR DT4.18 BL Desert Truck from Dromida.

**Additional Technical Information Will Be Included When It Becomes Available.**

FEATURES:
Chassis: Plastic
Drive: 4 wheel, shaft driven
Motor: 5300Kv Brushless
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    waterproof steering servo
Battery: 6-cell 7.2V 1300mAh NiMH
Battery Charger: Air Conditioning wall type
Suspension: Completely adjustable independent
Shocks: Oil-filled big bore composite body, with several mounting
    locations
LED Lights: 6 installed in light bar on top of taxi
Ball Bearings: Complete set
Body: Painted and cut
Tires and Wheels:

Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car
Guarantee: Ninety day limited service warranty through Pastime Services
    beginning at date of purchase

INCLUDES:
RTR DT4.18 Desert Truck with 2.4GHz Radio, Brushless Motor,
    Painted Body, 4 AA Batteries, 7.2V Battery, Air Conditioning Wall Charger,
    six LED Lights, Directions

SPECIFICATIONS:
Vehicle;
Length: 11.9" (302mm)
Width: 6.9" (176mm)
Height: 5.1" (129mm)
Weight w/Battery: 1.56 lbs (709 g)
    Body;
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 8x12mm Diff Assembly 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581