Common Sense RC Lectron Pro 7.4V 2000mAh 50C Lipo Battery with Mini Connector fo

This 2-cell (7.4 volt) Lithium Polymer 2000mAh battery pack was created particularly to be the ideal size, shape and weight for Dromida Speed Series 1/18 scale brushless vehicles. 50C constant discharge rate of 100 amps. Has Dromida port on the discharge leads.
Suitable Vehicles:

DB4.18BL
DT4.18BL
BX4.18BL
MT4.18BL
SC4.18BL

Requirements

Length: 93 mm
Width: 31 mm
Height: 17 mm
Weight: 93 g

Also available with Traxxas, Deans or EC3 connectors!
Important Notes:

Usage only with vehicles with brushless power systems and make sure your low voltage cutoff (LVC) is switched on. Brushed power systems typically do not feature an LVC and therefore posture a risk of enabling lipo batteries to run down too low and damaging them.
Usage only with battery chargers created particularly for lithium polymer (lipo) batteries. DO NOT ACCUSED OF THE CHARGER THAT COMES STOCK WITH DROMIDA SPEED SERIES CARS. The battery chargers that include lots of vehicles (consisting of the Dromida Speed Series) are only created for usage with nickel metal hydride (NiMH) batteries and are not safe for usage with lipo batteries. Charging lipo batteries in NiMH mode poses a severe fire hazard and ought to never be attempted.

You will enjoy this product if you have the product just above stated.



This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for usage with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and lots of other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

INCLUDES:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

NEEDS:
Linking between battery and charger

The listed below item also pairs really well with the item being gone over.



This is the Brushless Electric Powered, Radio Controlled, 1/18 scale
RTR DT4.18 BL Desert Truck from Dromida.

**Additional Technical Info Will Be Included When It Appears.**

FEATURES:
Chassis: Plastic
Drive: 4 wheel, shaft driven
Motor: 5300Kv Brushless
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
    water resistant steering servo
Battery: 6-cell 7.2V 1300mAh NiMH
Battery Charger: Air Conditioner wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled huge bore composite body, with numerous installing
    places
LED Lights: 6 installed in light bar on top of taxi
Ball Bearings: Complete set
Body: Painted and trimmed
Tires and Wheels:

Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car
Guarantee: Ninety day limited warranty through Pastime Solutions
    starting at date of purchase

INCLUDES:
RTR DT4.18 Desert Truck with 2.4GHz Radio, Brushless Motor,
    Painted Body, four AA Batteries, 7.2V Battery, Air Conditioner Wall Charger,
    6 LED Lights, Guidelines

SPECS:
Vehicle;
Length: 11.9" (302mm)
Width: 6.9" (176mm)
Height: 5.1" (129mm)
Weight w/Battery: 1.56 pounds (709 g)
    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 8x12mm Diff Assembly 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581