Common Sense RC Lectron Pro 7.4V 2000mAh 50C Lipo Battery with Mini Connector fo

This 2-cell (7.4 volt) Lithium Polymer 2000mAh battery pack was developed specifically to be the best size, shape and weight for Dromida Speed Series 1/18 scale brushless vehicles. 50C continuous discharge rate of 100 amps. Features Dromida port on the discharge leads.
Compatible Cars:

DB4.18BL
DT4.18BL
BX4.18BL
MT4.18BL
SC4.18BL

Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm
Weight: 93 g

Also available with Traxxas, Deans or EC3 connectors!
Important Notes:

Use only with vehicles with brushless power systems and make sure your low voltage cutoff (LVC) is switched on. Brushed power systems normally do not include an LVC and therefore position a risk of allowing lipo batteries to run down too low and harmful them.
Use only with battery chargers developed specifically for lithium polymer (lipo) batteries. DO NOT ACCUSED OF THE CHARGER THAT COMES STOCK WITH DROMIDA SPEED SERIES AUTOMOBILES. The battery chargers that have lots of vehicles (including the Dromida Speed Series) are only developed for usage with nickel metal hydride (NiMH) batteries and are not safe for usage with lipo batteries. Charging lipo batteries in NiMH mode positions a severe fire danger and need to never ever be attempted.

You will enjoy this item if you have the item previously mentioned.

Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for usage with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and lots of other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

CONSISTS OF:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

REQUIRES:
Connecting in between battery and battery charger

The listed below product likewise sets truly well with the product being gone over.



This is the Brushless Electric Powered, Radio Controlled, 1/18 scale
RTR DT4.18 BL Desert Truck from Dromida.

**Added Technical Details Will Be Included When It Becomes Available.**

FUNCTIONS:
Chassis: Plastic
Drive: 4 wheel, shaft driven
Motor: 5300Kv Brushless
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
    water resistant guiding servo
Battery: 6-cell 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Suspension: Completely adjustable independent
Shocks: Oil-filled big bore composite body, with numerous installing
    locations
LED Lights: Six installed in light bar on top of cab
Ball Bearings: Full set
Body: Painted and trimmed
Tires and Wheels:

Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when seen from the side of the automobile in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind automobile
Guarantee: Ninety day restricted warranty through Pastime Solutions
    starting at date of purchase

CONSISTS OF:
RTR DT4.18 Desert Truck with 2.4GHz Radio, Brushless Motor,
    Painted Body, four AA Batteries, 7.2V Battery, AC Wall Charger,
    six LED Lights, Instructions

SPECIFICATIONS:
Vehicle;
Length: 11.9" (302mm)
Width: 6.9" (176mm)
Height: 5.1" (129mm)
Weight w/Battery: 1.56 pounds (709 g)
    Body;
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 8x12mm Diff Assembly 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581