Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even during the most extreme 3D maneuvers. Talon 25 is meant for use in most 400-size helicopter setups adding to SIX LiPo or your preferred 3D foamie that pulls up to 25 amps. In spite of it's size, it boasts an impressive 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also provides Castle?s industry-leading helicopter functions, not to discuss easy programming using the Castle Link USB adapter (promo code totally free Castle Link consisted of). Talon 25 suggestions the scales at a mere 18 grams!

Talon 25 Specs:

Input voltage:

MINUTES: 2S LiPo
MAX: SIX LiPo

Max continuous amperage at complete throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp continuous (constantly examine servo draw prior to very first flight)

Measurements:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Products required for operation or installation: Battery and motor adapters (sold separately)
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (promo code totally free Castle Link adapter consisted of in bundle) and freely downloadable Castle Link Windows software application.
*RC PASTIME APPLICATION SCORE: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 miles per hour air flow of 25C (77F) or cooler air. Controller temperature must never go beyond 100C (212F). Surpassing existing or temperature ratings might harm parts and might reduce the life of the ESC. Constantly verify system existing draw at full-throttle. Decline load or increase air flow to reduce the ESC?s running temperature.

**Peak shows amperage sustainable for most servos? existing draw transients. Constantly confirm servo existing draw prior to the very first flight of the design.

Regularly purchased with the product that you are presently checking out.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and benefiting from all the technological gains within this remarkable market. Pulse is about power & performance at an expense that can be managed. Not does premium power come at a premium price – Pulse delivers all of it in one pulse accelerating punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could imagine at a cost never seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, permitting you to charge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to a totally brand-new level of extreme. If you're looking for power, you just discovered it. Pulse delivers intense power for intense pilots, and when it comes to value, Pulse simply can't be beat.
Feel the pulse, and get hold of a new Pulse Ultra Battery for your 3D demands!



Specs:
Voltage: 11.1V
Cell Count: 3S
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Measurements: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not come with power leads, and will need the end user to solder their own style of battery connector for the battery to be correctly utilized. Pulse batteries come with bare leads covered with heat shrink defense, and are all set for the connector of choice to be soldered to the positive/negative leads.