Castle Creations Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programs ability via Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in almost every environment (not intended for
    operation while submerged in liquid)
Suitable with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector
    On/Off Switch, and Instructions

NEEDS:
Battery connectors

SPECS:
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port

Below is a wonderful thing that many others have actually purchased the very same time.

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go between the Rocker Arms and the Lower Suspension Arms

FUNCTIONS:
Black steel building and construction

INCLUDES:
2 Pushrods w/pre-installed rod ends and balls

NEEDS:
Installing on the car

SPECS:
Length: 5.4" (137mm) end to end including rod ends
Size: 0.20" (5mm)

REMARKS:
For rod ends just utilize TRAC5347

This thing compliments the above reviewed thing.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Gets rid of the need for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level suitable for the receiver and servos

INCLUDES:
One CC BEC receiver battery eliminator

NEEDS:
Installation in the airplane

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to SIX LiPo)
Current output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Ratings are figured out with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V via the Castle Link (offered separately)
    Default voltage is 5.1V

This thing compliments the above reviewed thing.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Completely rebuildable
Double precision ball bearings
120 day limited warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending upon car

SPECS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)