Castle Creations Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows ability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in almost every environment (not meant for
    operation while submerged in liquid)
Suitable with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port
    On/Off Switch, and Instructions

NEEDS:
Battery adapters

SPECIFICATIONS:
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter

Below is a wonderful thing that many others have bought at the very same time.

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go in between the Rocker Arms and the Lower Suspension Arms

FUNCTIONS:
Black steel building

INCLUDES:
Two Pushrods w/pre-installed rod ends and balls

NEEDS:
Setting up on the automobile

SPECIFICATIONS:
Length: 5.4" (137mm) end to end consisting of rod ends
Size: 0.20" (5mm)

COMMENTS:
For rod ends just use TRAC5347

This thing compliments the above gone over thing.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Removes the requirement for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level suitable for the receiver and servos

INCLUDES:
One CC BEC receiver battery eliminator

NEEDS:
Setup in the aircraft

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to 6S LiPo)
Current output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Ratings are determined with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V through the Castle Link (offered individually)
    Default voltage is 5.1V

This thing compliments the above gone over thing.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Totally rebuildable
Double accuracy ball bearings
120 day limited service warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending upon automobile

SPECIFICATIONS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)