Castle Creations Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows ability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in almost every environment (not meant for
    operation while immersed in liquid)
Compatible with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port
    On/Off Switch, and Directions

NEEDS:
Battery adapters

SPECS:
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector

Below is a fantastic thing that numerous others have purchased the very same time.

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go between the Rocker Arms and the Lower Suspension Arms

FEATURES:
Black steel building

INCLUDES:
Two Pushrods w/pre-installed rod ends and balls

NEEDS:
Installing on the car

SPECS:
Length: 5.4" (137mm) end to end consisting of rod ends
Size: 0.20" (5mm)

REMARKS:
For rod ends only use TRAC5347

This thing praises the above gone over thing.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Remover by Castle Creations.

FEATURES:
Gets rid of the requirement for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level suitable for the receiver and servos

INCLUDES:
One CC BEC receiver battery eliminator

NEEDS:
Setup in the aircraft

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to 6S LiPo)
Existing output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Scores are identified with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V by means of the Castle Link (sold independently)
    Default voltage is 5.1V

This thing praises the above gone over thing.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Completely rebuildable
Double precision ball bearings
120 day minimal warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending on car

SPECS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)