Castle Creations Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in nearly every environment (not meant for
    operation while immersed in liquid)
Compatible with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port
    On/Off Switch, and Instructions

NEEDS:
Battery adapters

SPECS:
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port

Right here is a wonderful item that numerous others have actually bought at the same time.

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go in between the Rocker Arms and the Lower Suspension Arms

FEATURES:
Black steel building and construction

CONSISTS OF:
Two Pushrods w/pre-installed rod ends and balls

NEEDS:
Installing on the vehicle

SPECS:
Length: 5.4" (137mm) end to end including rod ends
Size: 0.20" (5mm)

REMARKS:
For rod ends only utilize TRAC5347

This item praises the above gone over item.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Remover by Castle Creations.

FEATURES:
Removes the requirement for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level ideal for the receiver and servos

CONSISTS OF:
One CC BEC receiver battery remover

NEEDS:
Installation in the aircraft

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to SIX LiPo)
Current output: 12 volts input = 7 amps* continuous, 10 amp peak;
    24 volts input = 5 amps* continuous, 7 amp peak
    *Scores are determined with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V through the Castle Link (offered separately)
    Default voltage is 5.1V

This item praises the above gone over item.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitors
Entirely rebuildable
Dual accuracy ball bearings
120 day restricted guarantee

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending on vehicle

SPECS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)