Castle Creations Sidewinder Sct Combo With 1410-3800Kv 5Mm Shaft Sensored Motor

This is the Castle 1410 1Y 3800Kv 4-Pole Sensored Brushless Motor
with 0.197" (5mm) Size Shaft
and the Sidewinder SCT Edition Waterproof* Electronic Speed Control.

**Sensored capabilities of this motor cannot be utlized with the**
**Sidewinder SCT.**
**If sensored operation is required,**
**a sensored ESC like the Castle Mamba X must be utilized.**

FEATURES:
3800Kv 4-Pole Sensored Brushless Motor, CSEC6600;
Suitable for 1/10 scale 2WD and 4WD short course trucks as much as 6.5lbs
    using a 2S LiPo, and 1/10 scale buggies and arena trucks as much as
    4lbs using a 2-3S LiPo
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration moistening wave spring on shaft
Rotor position sensing unit eliminates cogging and inconsistency throughout
    startup
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
    connectors
Four pole setup for maximum effectiveness at high RPM
HOLLER basic sensing unit port and labeled connections
Exchangeable front end bell/bearing assembly and rotor/shaft assembly
    Sidewinder ESC
5.0V,2.0A fixed BEC (Battery Remover Circuitry)
Reverse possibly disabled for racing
Totally programmable Castle feature set using the Castle USB Adapter
    (not included) and downloadable Castle Link Windows software
Detachable cooling fan
Proportional brake
One year restricted warranty on ESC start at date of purchase

INCLUDES:
1410 1Y 3800Kv 4-Pole Sensing united Brushless Motor, Sensor Wire, Power
    Leads with 4mm Male and Female Castle Bullet Connectors and 3
    3x5mm Socket Head Cap Screws
Sidewinder ESC with Cooling Fan, Battery Connectors, On/Off Switch

REQUIRES:
Battery connectors to mate with chosen battery
LiPo battery with a minimum of a 5000mAh ranking and a discharge rate of
    a minimum of 30C (or 25C batteries such as Traxxas Power Cells)
    Do not try to use NiMH cells in severe setups

SPECIFICATIONS:
Motor;
Input Voltage Range: 2-3S LiPo
Kv: 3800
Max RPM: 100,000
Length: 2.1" (52.7mm)
Size: 1.4" (36mm)
Shaft Size: 0.197" (5mm)
Shaft Length: 0.83" (21mm)
Weight: 8.4oz (237g)
Installing Hole Size: M3 @ 25mm
    ESC;
Input Voltage: 2s - Threes LiPo; 6 - 9 cell NiMH (2s just for Short
    Course Trucks)
BEC: 5.0 volts repaired, 2 amps
Length: 1.93" (49mm)
Width: 1.48" (38mm)
Height: 0.79" (20mm)
Weight: 1.96oz (55.5g)
Motor Connectors: 4mm female bullets
Programmable: Yes with Castle Link USB Adapter (sold independently)
Telemetry Link Capable: No

COMMENTS:
*Not meant for operation while immersed in liquid. If unit is
    run in wet conditions, wash with fresh water to remove dirt,
    or corrosives, then fully dry unit.