Castle Creations Sidewinder Sct Combo With 1410-3800Kv 5Mm Shaft Sensored Motor

This is the Castle 1410 1Y 3800Kv 4-Pole Sensored Brushless Motor
with 0.197" (5mm) Diameter Shaft
and the Sidewinder SCT Edition Waterproof* Electronic Speed Control.

**Sensored capabilities of this motor cannot be utlized with the**
**Sidewinder SCT.**
**If sensored operation is needed,**
**a sensored ESC like the Castle Mamba X must be utilized.**

FEATURES:
3800Kv 4-Pole Sensored Brushless Motor, CSEC6600;
Perfect for 1/10 scale 2WD and 4WD brief course trucks approximately 6.5pounds
    using a 2S LiPo, and 1/10 scale buggies and arena trucks approximately
    4lbs using a 2-3S LiPo
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high pureness copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration moistening wave spring on shaft
Rotor position sensing unit removes cogging and disparity during
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
    ports
Four pole setup for optimal efficiency at high RPM
HOLLER basic sensing unit port and identified connections
Changeable front end bell/bearing assembly and rotor/shaft assembly
    Sidewinder ESC
5.0V,2.0A fixed BEC (Battery Eliminator Circuitry)
Reverse maybe disabled for racing
Completely programmable Castle feature set using the Castle USB Adapter
    (not included) and downloadable Castle Link Windows software
Removable cooling fan
Proportional brake
One year minimal warranty on ESC beginning at date of purchase

INCLUDES:
1410 1Y 3800Kv 4-Pole Sensored Brushless Motor, Sensor Wire, Power
    Leads with 4mm Male and Female Castle Bullet Connectors and three
    3x5mm Socket Head Cap Screws
Sidewinder ESC with Cooling Fan, Battery Connectors, On/Off Change

REQUIRES:
Battery ports to mate with selected battery
LiPo battery with a minimum of a 5000mAh ranking and a discharge rate of
    a minimum of 30C (or 25C batteries such as Traxxas Power Cells)
    Do not attempt to utilize NiMH cells in severe setups

SPECIFICATIONS:
Motor;
Input Voltage Range: 2-3S LiPo
Kv: 3800
Max RPM: 100,000
Length: 2.1" (52.7mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 0.197" (5mm)
Shaft Length: 0.83" (21mm)
Weight: 8.4oz (237g)
Installing Hole Size: M3 @ 25mm
    ESC;
Input Voltage: 2s - 3s LiPo; 6 - 9 cell NiMH (2s only for Brief
    Course Trucks)
BEC: 5.0 volts fixed, 2 amps
Length: 1.93" (49mm)
Width: 1.48" (38mm)
Height: 0.79" (20mm)
Weight: 1.96oz (55.5g)
Motor Connectors: 4mm female bullets
Programmable: Yes with Castle Link USB Adapter (sold individually)
Telemetry Link Capable: No

COMMENTS:
*Not intended for operation while submerged in liquid. If unit is
    operated in damp conditions, wash with fresh water to get rid of dirt,
    or corrosives, then totally dry unit.