Castle Creations Monster 2 1:8Th 25V Car Esc Waterproof W/ 2200Kv Motor *Replaces

This Castle Mamba Monster 2 Water resistant 1/8 Scale Brushless Combination includes the sensored 1515 2200Kv motor and is advised for big 1/8 scale trucks and buggies weighing less than 15 pounds ready-to-run with batteries.

The Mamba Monster 2 is an extremely powerful sensorless ESC efficient in TWO to 6S LiPo operation. It's likewise water resistant*, so you can run your car across the morning dew, through soaked snow, or practically anywhere else you?d be intrigued in running a 1:8 scale RC buggy or truck. It includes an easy-access case allowing you to change fans rapidly, if necessary. Additionally, Mamba Monster 2 features solder posts, so altering battery wire length and direction is simple for a much more customized install.

Castle Creations 1515 1Y Sensored 4-Pole Brushless Motors integrate rotor position sensing unit technology with an improved high power and high performance motor design to provide ultra smooth start-up, accurate low speed control, predictable power shipment, extraordinary torque, and lightning fast action. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This removes the possibility of experiencing cogging or disparity throughout start-up, and permits the 1512 to provide ACCURATE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for.



NOTE:

Not meant for operation while submerged in liquid. If system is run in damp conditions, rinse with fresh water to remove dirt or corrosives, then completely dry unit.
The cooling fan needs to be eliminated prior to owning in damp conditions. It is not waterproof.

Motor Features:

4-POLE 12-SLOT design boasts remarkable PERFORMANCE and produces LESS HEAT
Extra-large gold plated solder tabs for LESS RESISTANCE and easy soldering
QUIETSENSE? Innovation guards magnetic field sound produced from the motor coils and keeps motor and ESC in sync at all times
HIGHER PRECISION and MORE EFFICIENT startups
ENHANCED design removes the need for mechanical timing adjustments
Sensor alignment method provides uniform timing and torque in both directions, immediately
REBUILDABLE design permits users to change front end bell with bearings or rotors with shaft
ROAR basic sensing unit port and identified connections
High strength 180?C neodymium sintered magnets
High quality, temperature-stabilized sensing units
High-purity, high-temperature copper windings
Hardened stainless steel shaft
10 AWG high strand wire with silicone insulation
Kevlar covered rotor
6061-T6 Billet aluminum heatsink can
High RPM NMB extra-large bearings
High quality 0.2mm steel laminations
Low resistance gold plated bullet ports

Specs:

ESC

Input Voltage Range: 2S - 6S LiPo
BEC Specifications: User selectable output in between 5 and 7 volts; default 5.5 volts
Running Environment: Water resistant* design permits usage in almost any environment
Brake: Proportional
Reversible: Yes, but may be disabled for racing
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped, completely removable** (see Item Usage Statements listed below)
Length: 2.19" (56mm)
Width: 1.86" (47mm)
Height: 1.33" (34mm)
Weight (with no battery adapter): 3.93 oz. (111.5 g)
Connectors: 6.5mm female bullets for motor connection. No battery adapter
Application Standards: Planned for as much as 6S (25.2 Volt) operation in cars weighing less than 15 pounds, with batteries, ready-to-run.
Recommended Motors: Neu-Castle 1512 2650Kv: Max Cells: FOUR Lipo or 12 NiMH
Neu-Castle 1515 2200Kv: Max Cells: 6S Lipo or 16 NiMH
Max. Advised Vehicle Weight: Less than 15 pounds, with batteries, ready-to-run with 2200kv motor; no more than 9 pounds with 2650kv motor.
Programmability: Totally programmable Castle feature set utilizing Castle Link USB adapter (voucher totally free Link included) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: No

Motor

Input Voltage Range: 2-6S LiPo
Kv: 2200
Max. RPM: 60,000
Length: 75.4mm
Diameter: 40mm (41.1mm w/fins)
Weight (w/wires): 429 g / 15.1oz
Shaft Size: 20mm
Diameter: 5mm
Installing Hole Specifications: M3 & M4 @ 25mm
Connectors: 6.5mm male Castle Bullet Connectors
Application Standards: Ideal for 1:8 scale off-road and on-road cars as well as 1:10 scale Monster Trucks as much as 15lbs.
Max. Advised Vehicle Weight: As much as 15lbs
Running modes: SMARTSENSE?, Sensored, Sensorless

NOTE: Not all LiPos are developed equivalent, and surge scores must never ever be utilized to identify a pack?s viability for a brushless application. Utilize the CONTINUOUS C ranking only. Mamba Monster setups often hit 100+ amps in peaks. Castle strongly suggest utilizing 5,000 mAh or bigger LiPo cells with a discharge ranking of a minimum of 30C (or high quality 25C batteries such as Traxxas? Power Cells?). Usage only moderate equipment ratios with NiMH cells. Do not attempt to use NiMH cells in severe setups.