Castle Creations Mamba X Sensored 25.2V Wp Esc 1406-6900Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
and the 1406 6900Kv Sensored Brushless Motor.
NOT for usage in 2WD or 4WD short course trucks.

For 1/10 scale 2WD cars on TWO LiPos, and lighter off-road 1/10 scale
    arena trucks and buggies with conservative gearing.

FEATURES:
ESC;
2S - SIX input voltage range
Suitable with 1/10 - 1/8 scale cars weighing less that 9lbs
    (4kg), including many severe 1/10 scale setups and 1/8 scale race
    buggies
Smartsense uses motor's sensors for smooth starts, outstanding torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak performance during all owning conditions
On-the-fly modifications can be made through the AUX wire as soon as enabled
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time data such as RPM, battery present and voltage,
    ESC and motor temperature level, throttle input and more
Audible informs
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year limited guarantee through Castle Creations beginning at date
    of purchase

    Motor;
High-strength neodymium sintered magnet with Kevlar wrap
High-performance 0.2mm steel lamination stacked stator
Castle 13 AWG silicone insulated wire leads
Extra-large NMB bearings
4 pole setup for optimal effectiveness at high RPM
CNC machined 6061-T6 aluminum front and rear endbells

INCLUDES:
Mamba X Extreme 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Port,
    and Waterproof Change
Replaceable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 6900Kv Sensored Brushless Motor
Sensor Wire

SPECIFICATIONS:
ESC (CSEM9500);
Input Voltage Variety: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Casle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be handicapped for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Automobile Weight: 9lbs (4kg) with batteries, ready to
    run

    Motor (CSEC5800);
Input Voltage Variety: 2-3S LiPo,
Kv: 6900
Max. RPM: 100,000
Max. Advised Automobile Weight: 4lbs (1814g) with battery RTR
Length: 1.9" (49.5mm)
Size: 1.4" (36mm)
Weight with Wires: 6.8oz (193g)
Shaft Size: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

REMARKS:
Waterproof under normal operation. Not intended for operation when
    completely immersed in water.