Castle Creations Mamba X Sensored 25.2V Wp Esc 1406-5700Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
and the 1406 5700Kv Sensored Brushless Motor.
NOT for use in 4WD brief course trucks.

For 2WD brief course trucks on 2S LiPos geared conservatively,
1/10 scale 2WD stadium trucks and buggies on 2S for slamming and
restricted runs on 3S LiPos with conservative tailoring, likewise perfect for
1/10 scale on roadway cars and trucks working on 2S and 3S LiPo power.

FEATURES:
ESC;
2S - 6S input voltage range
Compatible with 1/10 - 1/8 scale cars weighing less that 9lbs
    (4kg), consisting of lots of extreme 1/10 scale setups and 1/8 scale race
    buggies
Smartsense uses motor's sensors for smooth starts, excellent torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak efficiency throughout all driving conditions
On-the-fly modifications can be made through the AUX wire when made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time data such as RPM, battery existing and voltage,
    ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year restricted guarantee through Castle Creations starting at date
    of purchase

    Motor;
High-strength neodymium sintered magnet with Kevlar wrap
High-performance 0.2mm steel lamination stacked stator
Castle 13 AWG silicone insulated wire leads
Extra-large NMB bearings
4 pole setup for optimal performance at high RPM
CNC machined 6061-T6 aluminum front and rear endbells

CONSISTS OF:
Mamba X Severe 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Adapter,
    and Waterproof Switch
Replaceable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 5700Kv Sensing united Brushless Motor
Sensor Wire

SPECS:
ESC (CSEM9500);
Input Voltage Variety: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
    downloadable Casle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be handicapped for racing
Cooling Fan: 1.2" (30mm) detachable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Lorry Weight: 9lbs (4kg) with batteries, all set to
    run

    Motor (CSEC5700);
Input Voltage Variety: 2-3S LiPo,
Kv: 5700
Max. RPM: 100,000
Max. Suggested Lorry Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Size: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Size: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Installing Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

COMMENTS:
Waterproof under normal operation. Not meant for operation when
    totally submerged in water.