Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Ideal for 1/10 scale 2WD and 4WD brief course trucks up to 6.5pounds**
**using 3 or 4S LiPo power.

FEATURES:
ESC;
2S - 6S input voltage variety
Smartsense utilizes motor's sensing units for smooth starts, excellent torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak efficiency throughout all driving conditions
On-the-fly changes can be made through the AUX wire once enabled
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time information such as RPM, battery current and voltage,
    ESC and motor temperature level, throttle input and more
Audible informs
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year minimal warranty through Castle Creations beginning at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration moistening wave spring on shaft
Rotor position sensing unit eliminates cogging and disparity throughout
    startup
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    adapters
Four pole setup for maximum performance at high RPM
HOLLER basic sensing unit port and identified connections
Exchangeable front end bell/bearing assembly and rotor/shaft assembly

CONSISTS OF:
Mamba X Extreme 1/10 scale Electronic Speed Control
Exchangeable Wire Harness with Receiver Wire, AUX Wire, Fan Adapter,
    and Waterproof Change
Exchangeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
3 3x5mm Socket Head Cap Screws

SPECIFICATIONS:
ESC, CSEM9500
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Totally programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be disabled for racing
Cooling Fan: 1.2" (30mm) detachable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, ready to
    run
    Motor; CSEC6000
Input Voltage Range: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Mounting Hole Size: M3 @ 25mm

COMMENTS:
Water resistant under typical operation. Not meant for operation when
    totally submerged in water.