Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Perfect for 1/10 scale 2WD and 4WD brief course trucks as much as 6.5lbs**
**using 3 or FOUR LiPo power.

FEATURES:
ESC;
2S - 6S input voltage range
Smartsense uses motor's sensors for smooth starts, excellent torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense instantly advances
    timing for peak performance throughout all driving conditions
On-the-fly adjustments can be made through the AUX wire when allowed
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time information such as RPM, battery present and voltage,
    ESC and motor temperature level, throttle input and more
Audible alerts
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year minimal service warranty through Castle Creations starting at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensing unit eliminates cogging and inconsistency throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    adapters
4 pole configuration for maximum effectiveness at high RPM
HOLLER basic sensing unit port and identified connections
Changeable front end bell/bearing assembly and rotor/shaft assembly

INCLUDES:
Mamba X Extreme 1/10 scale Electronic Speed Control
Changeable Wire Harness with Receiver Wire, AUX Wire, Fan Adapter,
    and Waterproof Change
Changeable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensored Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECIFICATIONS:
ESC, CSEM9500
Input Voltage Variety: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Totally programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be handicapped for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, prepared to
    run
    Motor; CSEC6000
Input Voltage Variety: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

REMARKS:
Waterproof under normal operation. Not meant for operation when
    entirely immersed in water.