Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Ideal for 1/10 scale 2WD and 4WD short course trucks as much as 6.5lbs**
**utilizing 3 or FOUR LiPo power.

FEATURES:
ESC;
2S - 6S input voltage range
Smartsense utilizes motor's sensors for smooth starts, exceptional torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak performance throughout all driving conditions
On-the-fly adjustments can be made through the AUX wire once allowed
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time data such as RPM, battery present and voltage,
    ESC and motor temperature level, throttle input and more
Audible signals
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year restricted warranty through Castle Creations starting at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high pureness copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensing unit removes cogging and inconsistency throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
    ports
4 pole setup for maximum effectiveness at high RPM
ROAR basic sensing unit port and identified connections
Replaceable front end bell/bearing assembly and rotor/shaft assembly

CONSISTS OF:
Mamba X Severe 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Switch
Replaceable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECS:
ESC, CSEM9500
Input Voltage Variety: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be handicapped for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Lorry Weight: 9lbs (4kg) with batteries, ready to
    run
    Motor; CSEC6000
Input Voltage Variety: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

COMMENTS:
Water resistant under typical operation. Not planned for operation when
    totally immersed in water.