Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Suitable for 1/10 scale 2WD and 4WD brief course trucks approximately 6.5pounds**
**utilizing 3 or 4S LiPo power.

FEATURES:
ESC;
2S - SIX input voltage variety
Smartsense uses motor's sensing units for smooth starts, excellent torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense instantly advances
    timing for peak performance throughout all owning conditions
On-the-fly adjustments can be made through the AUX wire as soon as made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time data such as RPM, battery existing and voltage,
    ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year limited guarantee through Castle Creations starting at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high pureness copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensing unit eliminates cogging and disparity throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    adapters
4 pole setup for maximum efficiency at high RPM
HOLLER standard sensing unit port and labeled connections
Exchangeable front end bell/bearing assembly and rotor/shaft assembly

INCLUDES:
Mamba X Extreme 1/10 scale Electronic Speed Control
Exchangeable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Change
Exchangeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECS:
ESC, CSEM9500
Input Voltage Range: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) detachable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, prepared to
    run
    Motor; CSEC6000
Input Voltage Range: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

REMARKS:
Water resistant under typical operation. Not planned for operation when
    completely submerged in water.