Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Perfect for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs**
**using 3 or 4S LiPo power.

FEATURES:
ESC;
2S - SIX input voltage variety
Smartsense uses motor's sensors for smooth starts, outstanding torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense instantly advances
    timing for peak efficiency throughout all driving conditions
On-the-fly modifications can be made through the AUX wire as soon as enabled
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time data such as RPM, battery current and voltage,
    ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year minimal service warranty through Castle Creations beginning at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high pureness copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration moistening wave spring on shaft
Rotor position sensor removes cogging and inconsistency throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    connectors
Four pole setup for maximum efficiency at high RPM
ROAR standard sensor port and labeled connections
Changeable front end bell/bearing assembly and rotor/shaft assembly

INCLUDES:
Mamba X Severe 1/10 scale Electronic Speed Control
Changeable Wire Harness with Receiver Wire, AUX Wire, Fan Port,
    and Waterproof Switch
Changeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECIFICATIONS:
ESC, CSEM9500
Input Voltage Variety: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Lorry Weight: 9lbs (4kg) with batteries, prepared to
    run
    Motor; CSEC6000
Input Voltage Variety: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

REMARKS:
Water resistant under regular operation. Not planned for operation when
    entirely immersed in water.