Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Suitable for 1/10 scale 2WD and 4WD brief course trucks up to 6.5lbs**
**utilizing 3 or 4S LiPo power.

FEATURES:
ESC;
2S - 6S input voltage variety
Smartsense uses motor's sensors for smooth starts, exceptional torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak efficiency throughout all driving conditions
On-the-fly changes can be made through the AUX wire when made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time information such as RPM, battery existing and voltage,
    ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year limited service warranty through Castle Creations beginning at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensing unit removes cogging and disparity throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    connectors
Four pole configuration for maximum effectiveness at high RPM
HOLLER standard sensing unit port and identified connections
Replaceable front end bell/bearing assembly and rotor/shaft assembly

CONSISTS OF:
Mamba X Severe 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Change
Replaceable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECS:
ESC, CSEM9500
Input Voltage Variety: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be handicapped for racing
Cooling Fan: 1.2" (30mm) detachable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, ready to
    run
    Motor; CSEC6000
Input Voltage Variety: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Size: 1.4" (36mm)
Shaft Size: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

REMARKS:
Waterproof under typical operation. Not planned for operation when
    completely submerged in water.