Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Perfect for 1/10 scale 2WD and 4WD brief course trucks approximately 6.5pounds**
**utilizing 3 or 4S LiPo power.

FEATURES:
ESC;
2S - SIX input voltage variety
Smartsense uses motor's sensing units for smooth starts, exceptional torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense instantly advances
    timing for peak performance throughout all owning conditions
On-the-fly adjustments can be made through the AUX wire once made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time information such as RPM, battery current and voltage,
    ESC and motor temperature level, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year limited service warranty through Castle Creations starting at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high pureness copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensing unit gets rid of cogging and inconsistency throughout
    start-up
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high hair count silicone insulated wires with 4mm male bullet
    adapters
Four pole configuration for optimal effectiveness at high RPM
ROAR standard sensing unit port and labeled connections
Changeable front end bell/bearing assembly and rotor/shaft assembly

CONSISTS OF:
Mamba X Severe 1/10 scale Electronic Speed Control
Changeable Wire Harness with Receiver Wire, AUX Wire, Fan Adapter,
    and Waterproof Change
Changeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
3 3x5mm Socket Head Cap Screws

SPECS:
ESC, CSEM9500
Input Voltage Range: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Totally programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be handicapped for racing
Cooling Fan: 1.2" (30mm) detachable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Automobile Weight: 9lbs (4kg) with batteries, all set to
    run
    Motor; CSEC6000
Input Voltage Range: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Installing Hole Size: M3 @ 25mm

REMARKS:
Water resistant under normal operation. Not meant for operation when
    totally immersed in water.