Castle Creations Mamba X Sct Pro Sensored 25.2V Wp Esc & 1410-3800Kv Combo

This is the Mamba X 25.5V Water resistant Electronic Speed Control
and the 1410-3800kV Brushless Motor Combo from Castle Creations.

FEATURES:
Suitable for 1/10 scale 2WD and 4WD short course trucks weighing approximately
    6.5pounds (2.9kg) running on 2S LiPo, as well as 1/10 scale buggies and
    stadium trucks approximately 4lbs (1.8kg) on 2-3S LiPo power

    ESC;
SMARTSENSE uses motor's sensing units for smooth starts, exceptional torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak efficiency throughout all owning conditions
On-the-fly changes can be made through the AUX wire as soon as enabled
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time data such as RPM, battery present and voltage,
ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year restricted warranty through Castle Creations starting at date
    of purchase

    1410-3800kV Sensored Motor;
Sensor board with temperature-stabilized sensing units
QUIETSENSE technology guards sensing units from electromagnetic field noise-
    keeps motor and ESC in sync
Sensor positioning provides uniform timing and torque in both
    instructions
High strength 180°C grade neodymium sintered magnets with high-
    strength Kevlar wrap
Hardened stainless steel shaft
HOLLER basic sensing unit port and identified connections
Changeable front end bell/bearing assembly or rotor/shaft
    assemblies
CNC machined 6061 anodized aluminum can

INCLUDES:
Mamba X 25.5V ESC and 1410-3800kV Sensored Brushless Motor with
    Guidelines

REQUIRES:
Battery Connectors to match chosen battery
Pinion Equipment for particular vehicle and running conditions

SPECIFICATIONS:
Mamba X 25.5V ESC (CSEM9500);
Input Voltage Range: 2-6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 535V
Programmable: Totally programmable with Castle Link USB Adapter, and
downloadable Casle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be handicapped for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Lorry Weight: 9lbs (4kg) with batteries, ready to
    run

    1410-3800kV Brushless Motor (CSEC6600);
Input Voltage Range: 2-6S LiPo
Max RPM: 100,000
Length: 2.1" (52.7mm)
Diameter: 1.4" (36mm)
Weight: 8.4oz (237g)
Installing Hole Size: M3 @ 25mm
Connectors: 4mm Castle bullet male connectors
Running Modes: SMARTSENSE, Sensored, Sensorless