Castle Creations Mamba X Sct Pro Sensored 25.2V Wp Esc & 1410-3800Kv Combo

This is the Mamba X 25.5V Water resistant Electronic Speed Control
and the 1410-3800kV Brushless Motor Combo from Castle Creations.

FEATURES:
Ideal for 1/10 scale 2WD and 4WD short course trucks weighing approximately
    6.5lbs (2.9kg) running on 2S LiPo, and also 1/10 scale buggies and
    arena trucks approximately 4lbs (1.8kg) on 2-3S LiPo power

    ESC;
SMARTSENSE utilizes motor's sensing units for smooth starts, outstanding torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak efficiency throughout all driving conditions
On-the-fly adjustments can be made through the AUX wire once allowed
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time data such as RPM, battery present and voltage,
ESC and motor temperature level, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year limited guarantee through Castle Creations starting at date
    of purchase

    1410-3800kV Sensing united Motor;
Sensor board with temperature-stabilized sensing units
QUIETSENSE innovation guards sensing units from magnetic field noise-
    keeps motor and ESC in sync
Sensing unit alignment delivers uniform timing and torque in both
    instructions
High strength 180°C grade neodymium sintered magnets with high-
    strength Kevlar wrap
Solidified stainless steel shaft
ROAR basic sensor port and labeled connections
Exchangeable front end bell/bearing assembly or rotor/shaft
    assemblies
CNC machined 6061 anodized aluminum can

INCLUDES:
Mamba X 25.5V ESC and 1410-3800kV Sensored Brushless Motor with
    Guidelines

NEEDS:
Battery Connectors to match chosen battery
Pinion Gear for specific lorry and running conditions

SPECS:
Mamba X 25.5V ESC (CSEM9500);
Input Voltage Variety: 2-6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 535V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Casle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, prepared to
    run

    1410-3800kV Brushless Motor (CSEC6600);
Input Voltage Variety: 2-6S LiPo
Max RPM: 100,000
Length: 2.1" (52.7mm)
Diameter: 1.4" (36mm)
Weight: 8.4oz (237g)
Mounting Hole Size: M3 @ 25mm
Connectors: 4mm Castle bullet male adapters
Running Modes: SMARTSENSE, Sensored, Sensorless