Castle Creations Mamba Monster X 25.2V ESC / 1515-2200Kv V2 Motor

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Putting The X In Extreme!
The Mamba Monster X ESC and 1515-2200Kv V2 carries out extremely in beast trucks with approximately 6S LiPo packs (4S LiPo is the sweet area), and works great in 1:8 scale buggies, truggies and on-road vehicles along with 1:10 scale beast trucks weighing approximately 15 pounds. You will have all the power your 1:8th scale automobile needs with the smoother throttle control of a sensored motor. Mamba Monster X takes Castle's legendary “beast” performance to an entire new level.

New 1515-2200Kv V2 Motor Now Included!
Castle's dedication to quality drives them to fine-tune the user experience, enhance performance, and ensure that every element of their products are thoroughly developed to supply the utmost complete satisfaction. Let's face it, even the very best products have room for refinement, which is why they are introducing the recently revamped 1515-2200Kv V2, a new spin on among the most popular motors we have actually ever produced! The change has actually consisted of numerous improvements, the majority of contributed by new stator and rotor assembly upgrades that, in turn, allow for even greater PERFORMANCE, REDUCED TEMPERATURES, AND EASIER START-UPS!





Mamba Monster X Features

Input Voltage Range : 2s-6s LiPo (ESC Just)

SMARTSENSE, SENSORED ONLY and BRUSHED Running Modes

Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit)

Auxiliary Wire Functionality enables “on-the-fly” modifications such as Max Power and Max Brake.

ESC is housed in a resilient injection molded case and potted in WATERPROOF epoxy to protect the electronic devices and promote efficient heat transfer.

Removable 30mm fan

Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters

DATA LOGGING to catch and tape performance information from your automobile

AUDIBLE ALERTS for simple diagnosis of typical concerns such as motor-over-temperature and low-voltage cutoff.

Convenient TRANSMITTER programs for six typical adjustable settings inlcuding cutoff voltage and drag brake.

SMARTSENSE™ uses the motor's sensors at startup to supply cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC effortlessly shifts to Castle's ultra-efficient sensorless mode.

CASTLE LINK USB shows set (coupon consisted of with purchase)

Optional smartphone-based shows with the B-LINK™ BLUETOOTH ADAPTER (sold individually) and Castle Link App readily available on Google Play or Apple App Store

PROUDLY DESIGNED, ASSEMBLED AND SUPPORTED IN KANSAS, U.S.A.

1515-2200 V2 Motor Features

Input Voltage variety: 2s-6s LiPo

Upgraded stator and rotor assemblies to enhance magnetic flux.

Reduced magnetic cogging, producing less recurring drag brake.

Increased effectiveness, leading to lower temperatures and longer run times.

Smoother start-up, reducing cogging or stuttering when beginning with a stop.

Rebuildable style permits replacement of front end bell/bearing assembly or rotor/shaft assembly.

High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets

Castle 10 AWG, High-Strand-Count Silicone-Insulated Wire with 6.5mm Bullet Connectors

High-Performance 0.2mm Steel Lamination Stacked Stator

Large, low-resistance, gold-plated solder tabs

Sensor board with Premium quality Temperature-Stabilized Sensors

T6 Aluminum CNC Machines Front/Rear End bell

Happily Created and Supported in Kansas, USA.

Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings





Date Logging
Mamba Monster X can catch and tape performance information from your last number of runs, commonly described as information logging. This information can be downloaded through the Castle Link USB programmer; you can utilize the Quick Connect Duo (sold individually) to allow you to gain access to both wires into a single Castle Link connection. You can then analyze this information and make modifications to the ESC to make the most of both performance and battery life.
 

Auxiliary Functionality
Mamba Monster X features the addition of a new, programmable AUX wire that permits you to make “on-the-go” modifications to numerous settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default however is programmable through Castle Link or the Castle Link iOS App. Once you have configured the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter.
 

Programmability
Totally programmable Castle function set using Castle Link USB adapter (coupon free of charge Castle Link adapter consisted of in plan) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B-LINK Bluetooth Adapter. (A small subset of the settings readily available through Castle Link Windows software can be accessed through manual shows through the transmitter stick).
 

Firmware Updates
Users will get open door to all firmware updates, including added functions sets using the Castle Link USB Shows Package.
 

1515-2200Kv V2 Motor
The IMPROVED 4-POLE 12-SLOT sensored style boasts exceptional effectiveness and produces LESS HEAT.
 

Power System Alerts
Mamba Monster X also features updated Audible Alerts that will inform you of possible concerns with calibrations and mistake conditions to assist diagnose issues in the field.
 





Telemetry Capable
Mamba Monster X is telemetry all set, which suggests owners of Futaba T4PX Transmitters will have the ability to acquire the Castle Creations Telemetry Link for S.BUS2. Real-time information such as ESC temperature level, voltages, and RPM can be kept an eye on to ensure performance advantages and extra you the “unidentified” criteria that all R/C enthusiasts experience at some point. Telemetry information provides another level of protection and can increase performance.
 



Specifications

BEC: Yes

BEC Continous Current: Adjustable

BEC Optimum Burst Current: 8A

Brakes: Proportional

Port Type: 6.5mm Bullet

Input Voltage: TWO

Item Height: 1.44" (37 mm)

Item Length: 2.09" (53 mm)

Item Weight: 3.92 oz. (111.g)

Item Width: 1.93" (49 mm)

Reverse: Yes

RPM/Volt (Kv): 2200 kv

Shaft Diameter: 0.19685" (5 mm)

Shaft Length: 0.787402" (20 mm)

Water-Resistant: Yes