Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FEATURES:
For 1/18 scale 2 or 4 wheel drive cars weighing as much as
    2.25pounds (1.02kg)
Sturdy BEC (battery remover circuit) handles high-draw
    digital servos
Adjustable settings include;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Car LiPo Cutoff
Programmable Auxiliary Wire (AUX) allows changes to several
    settings such as torque control and max throttle from a suitable
    transmitter

CONSISTS OF:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (require port to mate w/selected
    battery, 4mm Castle Creations connectors suggested)
On/Off Change
Receiver Adapter
Instruction Pamphlet

NEEDS:
Compatible Motor and LiPo Battery, suggested battery capacity for
    1/18 scale cars is 1500mAh, 30C or greater continuous
    discharge

SPECS:
Input Voltage Range: Minutes. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Change: Waterproof
Measurements: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without port

REMARKS:
Not planned for operation while immersed in liquid. If unit is
    operated in wet conditions, wash with fresh water to remove
    dirt or corrosives, then completely dry unit.