Castle Creations Mamba X 25.2V Waterproof Esc And 1406-1900Kv Sensored Motor Comb

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC
with the 1406 4-Pole 1900Kv Sensored Brushless Motor.

FEATURES:
ESC;
2S - SIX input voltage variety
Suitable with 1/10 - 1/8 scale lorries weighing less that 9lbs
    (4kg), including lots of severe 1/10 scale setups and 1/8 scale race
    buggies
Smartsense utilizes motor's sensing units for smooth starts, outstanding torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak efficiency throughout all owning conditions
On-the-fly modifications can be made through the AUX wire once made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time information such as RPM, battery current and voltage,
    ESC and motor temperature, throttle input and more
Audible signals
CNC aluminum case
12AWG high strand count silicone insulated battery wires

    Motor;
For 1/10 scale rock crawlers utilizing 3-4S LiPo batteries and weighing
    less than 8lbs (3.6kg), might likewise be used in more aggressive
    setups in lighter 1/10 scale touring automobiles, stadium trucks or
    buggies weighing up to 5lbs (2.3kg)
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE utilizes motor's sensing units to provide smooth starts, outstanding
    torque and low-speed drivability-once motor is turning it
    transitions to sensorless mode
ROAR basic sensor port and labeled connections
High efficiency 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design permits replacement of front end bell/bearing
    assembly or rotor/shaft assembly
One year restricted warranty through Castle Creations beginning at date
    of purchase

INCLUDES:
Mamba X Severe 1/10 scale Electronic Speed Control, CSEM9500
Changeable Wire Harness with Receiver Wire, AUX Wire, Fan Port,
    and Waterproof Change
Changeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 4-Pole 1900Kv Sensored Brushless Spider Motor, CSEC6800

REQUIRES:
Battery adapters to match selected battery

SPECS:
ESC,
Input Voltage Variety: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be handicapped for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, ready to
    run

    Motor,
Input Voltage Variety: 3-4S LiPo
Kv: 1900
Max RPM: 100,000
Length: 1.9" (49.5mm)
Size: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft Length: 0.59" (15mm)
Shaft Size: 1.8" (3.17mm)
Installing Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge
    wire
Sensing unit Wire Length: 8.3" (210mm)