Castle Creations Mamba X 25.2V Waterproof Esc And 1406-1900Kv Sensored Motor Comb

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC
with the 1406 4-Pole 1900Kv Sensored Brushless Motor.

FEATURES:
ESC;
2S - SIX input voltage variety
Suitable with 1/10 - 1/8 scale lorries weighing less that 9lbs
    (4kg), including numerous severe 1/10 scale setups and 1/8 scale race
    buggies
Smartsense uses motor's sensing units for smooth starts, exceptional torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak performance during all owning conditions
On-the-fly modifications can be made through the AUX wire once enabled
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time data such as RPM, battery existing and voltage,
    ESC and motor temperature level, throttle input and more
Audible alerts
CNC aluminum case
12AWG high hair count silicone insulated battery wires

    Motor;
For 1/10 scale rock spiders using 3-4S LiPo batteries and weighing
    less than 8lbs (3.6kg), might likewise be used in more aggressive
    setups in lighter 1/10 scale touring vehicles, stadium trucks or
    buggies weighing as much as 5lbs (2.3kg)
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE uses motor's sensing units to offer smooth starts, exceptional
    torque and low-speed drivability-once motor is turning it
    transitions to sensorless mode
ROAR standard sensing unit port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
    assembly or rotor/shaft assembly
One year limited warranty through Castle Creations beginning at date
    of purchase

CONSISTS OF:
Mamba X Extreme 1/10 scale Electronic Speed Control, CSEM9500
Exchangeable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Change
Exchangeable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 4-Pole 1900Kv Sensored Brushless Spider Motor, CSEC6800

NEEDS:
Battery adapters to match selected battery

SPECIFICATIONS:
ESC,
Input Voltage Range: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Lorry Weight: 9lbs (4kg) with batteries, all set to
    run

    Motor,
Input Voltage Range: 3-4S LiPo
Kv: 1900
Max RPM: 100,000
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft Length: 0.59" (15mm)
Shaft Diameter: 1.8" (3.17mm)
Installing Hole Specs: M3 @ 25mm
Connectors: 4mm Male Castle Bullet Connectors connected to 13 gauge
    wire
Sensor Wire Length: 8.3" (210mm)