Castle Creations Cc Blower Sct/Sv3 Fan

This is the Cooling Fan for the Castle Creations Sidewinder 3,
or Sidewinder SCT Electronic Speed Controls.

**Will not deal with older design cases utilized on the**
**non-waterproof Sidewinder SCT and initial Sidewinder 3.**

FFEATURES:
Snaps onto ESC, no screws required

CONSISTS OF:
Fan with Wire Lead and Connector
Fan Shroud

SPECS:
Input Voltage: 4.8 - 7.4V
Maximum RPM: 14,000
Wire Length: 11.4" (290mm)
Waterproof: NO, eliminate before exposing ESC to moisture

Regularly gotten with the product that you are presently reviewing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programs capability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in nearly every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery connector of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

The below product also pairs actually well with the product being discussed.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outdoors diameter between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Plugs into receiver and drops motor temperature as much as 30°
One year limited guarantee through maker beginning at date of
    purchase

CONSISTS OF:
Fan with wire and connector, shroud and two zip ties

REQUIRES:
Connecting to motor can and connecteding into receiver

SPECS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

Numerous others have gotten this product along with the product that you are presently reviewing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to connect in reverse
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
One black female plastic connector
One black male plastic connector
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins