JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Castle Creations CC Blower Fan for 1/5th 2028 series motors (Castle Creations 011001900 | CSE011001900)

Model: Castle Creations 011001900
Dist. #: CSEM1900   SKU: CSE011001900

Customer Reviews:  5 of 5 (1 Review)

Out of stock

List Price:  $15.95
Price:  $11.99
You Save:  $3.96 (25%)

This item will earn you 12 reward point(s).
12 points = $0.24 off your next order. Learn More

Updated on Nov 18, 2019 09:01:42 PM

CC Blower 20 Series...
This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electric fans lower motor temperature levels as much as 30 degrees
Molded plastic shroud, black in color
One year minimal warranty through Castle Creations beginning at date
    of purchase

INCLUDES:
2 Fans, Shroud, two Zip Ties and Wire Lead

SPECIFICATIONS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Here is an additional thing that praises the thing being talked about.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and extend life of motor or ESC
Thirty day minimal warranty beginning at date of purchase-valid
    in the United States only

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Lots of others have actually bought this thing along with the thing that you are currently reviewing.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Solidified steel building
Fits 0.196" (5mm) diameter motor shafts
Number of teeth and pitch stamped on gear for easy identification

INCLUDES:
18T Pinion Gear with Set Screw

SPECIFICATIONS:
Number of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

This thing praises the main item below.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Vehicle, TRAD42**.

FUNCTIONS:
Molded plastic building
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Vehicle

You will certainly love this product if you have the product above pointed out.

Y-Harness for Dual Cooling Fan Connection

This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Allows two cooling fans geared up with JST plugs to be installed onto
    Novak ESCs for higher cooling ability

INCLUDES:
Dual Cooling Fan Y-Harness from Novak

SPECIFICATIONS:
Overall Length: 3.6" (91mm) not consisting of adapters

Get this thing to enhance the one you are reading about.



This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.

FEATURES:
Semi stiff building does not need a hard case and removes
    wire harness adapters that can loosen and fail
Engineered specifically to fit Traxxas designs
New high current connector with gold-plated copper terminals and
    incorporated balance connector
iD Car Battery Recognition permits Traxxas iD geared up chargers to
    immediately set and optimize charge settings for particular battery
MAXX cable high-efficiency 12 gauge silicone jacketed wire

INCLUDES:
Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High
    Current Connector and Integrated Balance Plug

REQUIRES:
LiPo compatible charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Setup: 3S1P
Constant Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Measurements: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
Weight: 13.3oz (376g)

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or leak cells
NEVER place on flammable materials or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids

Frequently Bought Together

Castle Creations CC Blower Fan for 1/5th 2028 series motors
+
Hot Racing Motor Heat Sink/ESC Cooling Fan 30x30mm
+
Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5
This Item: Castle Creations CC Blower Fan for 1/5th 2028 series motors
$11.99
Hot Racing Motor Heat Sink/ESC Cooling Fan 30x30mm
$8.88
Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5
$3.99

Total Price: $24.86

Add All Three To Cart
5 out of 5 stars
5 star  
  (1)
4 star  
  (0)
3 star  
  (0)
2 star  
  (0)
1 star  
  (0)

Share your thoughts with others

Write a Customer Review
  
  

 
By Kyle Moss on January 3, 2016   Verified Purchase

I used this part on my Traxxas X-Maxx, it works great on top of the stock motor heat sink.

Was this review helpful to you?
  
Thank you for your feedback.

Customers who bought this product also purchased

Visual Parts Finder
What's New?
";