JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Castle Creations CC Blower Fan for 1/5th 2028 series motors (Castle Creations 011001900 | CSE011001900)
Attn Utah Customers, Please use our "Curbside Pickup" option as much as possible. Lean More

Due to the impact of the COVID-19/Corona virus, there my be delays in the shipping estimates shown on our site.

We appreciate your understanding and support during these uncertain times.

Model: Castle Creations 011001900
Dist. #: CSEM1900   SKU: CSE011001900

Customer Reviews:  5 of 5 (1 Review)

Out of stock

List Price:  $15.95
Price:  $11.99
You Save:  $3.96 (25%)

This item will earn you 12 reward point(s).
12 points = $0.24 off your next order. Learn More

Updated on Jun 1, 2020 07:24:21 PM

CC Blower 20 Series...
This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electrical fans lower motor temperature levels as much as 30 degrees
Molded plastic shroud, black in color
One year minimal guarantee through Castle Creations beginning at date
    of purchase

CONSISTS OF:
Two Fans, Shroud, two Zip Ties and Wire Lead

SPECIFICATIONS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Right here is one more product that compliments the product being discussed.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and extend life of motor or ESC
Thirty day minimal guarantee beginning at date of purchase-valid
    in the United States just

CONSISTS OF:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Numerous others have actually bought this product in addition to the product that you are currently reviewing.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FEATURES:
Hardened steel building
Fits 0.196" (5mm) size motor shafts
Variety of teeth and pitch marked on equipment for easy recognition

CONSISTS OF:
18T Pinion Gear with Set Screw

SPECIFICATIONS:
Variety of Teeth: 18
Pitch: 1.0 metric
Pressure Angle: 20°

This product compliments the main item here.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Car, TRAD42**.

FEATURES:
Molded plastic building
1.0 metric pitch

CONSISTS OF:
50T Spur Gear for the Traxxas XO-1 On-Road Car

You will certainly like this item if you have the item earlier pointed out.

Y-Harness for Dual Cooling Fan Connection

This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Enables two cooling fans equipped with JST plugs to be installed onto
    Novak ESCs for greater cooling ability

CONSISTS OF:
Dual Cooling Fan Y-Harness from Novak

SPECIFICATIONS:
Total Length: 3.6" (91mm) not consisting of connectors

Get this product to boost the one you read about.

5000Mah 11.1V 3S 25C Ml Lipo

This is the Traxxas Power Cell 11.1V 5000mAh 25C THREE LiPo Battery.

FEATURES:
Semi stiff building does not require a tough case and eliminates
    wire harness connectors that can loosen up and fail
Engineered specifically to fit Traxxas designs
New high current connector with gold-plated copper terminals and
    incorporated balance connector
iD Car Battery Identification permits Traxxas iD equipped battery chargers to
    automatically set and optimize charge settings for particular battery
MAXX cable television high-efficiency 12 gauge silicone jacketed wire

CONSISTS OF:
Traxxas Power Cell 11.1V 5000mAh 25C LiPo THREE Battery with High
    Present Connector and Integrated Balance Plug

NEEDS:
LiPo compatible charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Setup: 3S1P
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
Weight: 13.3oz (376g)

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER disassemble or modify pack electrical wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
ALWAYS stay out of reach of kids

Frequently Bought Together

Castle Creations CC Blower Fan for 1/5th 2028 series motors
+
Hot Racing Motor Heat Sink/ESC Cooling Fan 30x30mm
+
Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5
This Item: Castle Creations CC Blower Fan for 1/5th 2028 series motors
$11.99
Hot Racing Motor Heat Sink/ESC Cooling Fan 30x30mm
$8.88
Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5
$3.99

Total Price: $24.86

Add All Three To Cart
5 out of 5 stars
5 star  
  (1)
4 star  
  (0)
3 star  
  (0)
2 star  
  (0)
1 star  
  (0)

Share your thoughts with others

Write a Customer Review
  
  

 
By Kyle Moss on January 3, 2016   Verified Purchase

I used this part on my Traxxas X-Maxx, it works great on top of the stock motor heat sink.

Was this review helpful to you?
  
Thank you for your feedback.

Customers who bought this product also purchased

Visual Parts Finder
";