Castle Creations Field Link Portable Programmer Surface

This is the Field Link Portable Programmer Car Card from Castle Creations.

FEATURES:
Programs Castle vehicle controllers without a computer system
Works as a complete USB Castle Relate to your computer
Works with all Castle Link compatible vehicle products

CONSISTS OF:
One Field Link Portable Programmer Card
One USB cable television

REQUIRES:
Windows PC
Castle Link Software (available at www.castlecreations.com)

SPECIFICATIONS:
Length: 55mm (2.2")
Width: 85mm (3.3")
Density: 5mm (0.20")

COMMENTS:
Will just work with Castle controller firmware released after 2007

This thing compliments the above gone over thing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to connect in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Below is a wonderful thing that numerous others have actually purchased the same time.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to connect in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Safe and secure positive locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Get this thing to enhance the one you are reading about.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design gets rid of the possiblility of reverse polarity connections.
Provides a safe connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering connectors onto wires

Frequently bought with the thing that you are presently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Supplies a safe connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
Four brief pieces of Black shrink tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

Lots of others have actually bought this thing along with the thing that you are presently reviewing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programs ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for usage in nearly every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces many stock brushed motors
Four magnet, four pole rotor for greater torque
1.4" diameter slotted stator
Detachable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery connector of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)