Castle Creations Field Link Portable Programmer Surface

This is the Field Link Portable Programmer Vehicle Card from Castle Creations.

FEATURES:
Programs Castle car controllers without a computer system
Functions as a total USB Castle Link with your computer system
Functions with all Castle Link compatible car items

INCLUDES:
One Field Link Portable Programmer Card
One USB cable

REQUIRES:
Windows PC
Castle Link Software application (available at www.castlecreations.com)

SPECIFICATIONS:
Length: 55mm (2.2")
Width: 85mm (3.3")
Density: 5mm (0.20")

REMARKS:
Will just work with Castle controller firmware launched after 2007

This thing compliments the above reviewed thing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring loaded terminals for constant
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One black female plastic adapter
One black male plastic adapter
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

Here is a great thing that many others have purchased the same time.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Safe and secure favorable locking spring loaded terminals for constant
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
2 black male plastic connectors
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

Get this thing to enhance the one you read around.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design eliminates the possiblility of reverse polarity connections.
Provides a safe and secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering connectors onto wires

Often purchased with the thing that you are currently reading about.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Offers a safe and secure connection for battery and motor connections

INCLUDES:
2 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

Numerous others have purchased this thing along with the thing that you are currently reading about.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB programming capability by means of Castle Link USB adapter (not suched as,
    order CSEM6300)
Waterproof for usage in nearly every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)