Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Created for usage in electric RC helis or aircrafts pulling up to
    15 amps
8amp peak, 3amp constant BEC manages high drain servos
Castle Link suitable, Portable Programmer Air Card offered independently-
    CSEM6301
One year minimal warranty through Castle Creations starting at date
    of purchase

CONSISTS OF:
Talon 15 Mini ESC with Receiver Connector and Recommendations

REQUIRES:
Motor ports of modeler's option
Soldering iron for attaching ports

SPECS:
Input Voltage: 2-4S LiPo
Max Constant Amperage: 15A (at complete throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp constant
Measurements: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Many others have acquired this thing in addition to the thing that you are presently reviewing.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Perfect for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An outstanding motor for airplanes as much as 220 grams (8 oz) using 2 li-poly cells. Extremely lightweight at 19 grams consisting of important prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and important firewall install. Great for little 3D airplanes weighing around 6 oz, or aerobatic airplanes as much as 8 oz. Use with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, dual ball bearings, important prop saver for APC E props and important firewall install flange. Note that the prop saver is sized for APC props. GWS props will require some adjustment to fit effectively. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance present: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5