Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Created for use in electric RC helis or aircrafts pulling up to
    15 amps
8amp peak, 3amp continuous BEC handles high drain servos
Castle Link compatible, Portable Programmer Air Card sold separately-
    CSEM6301
One year restricted service warranty through Castle Creations beginning at date
    of purchase

INCLUDES:
Talon 15 Mini ESC with Receiver Connector and Recommendations

NEEDS:
Motor ports of modeler's option
Soldering iron for attaching ports

SPECS:
Input Voltage: 2-4S LiPo
Max Continuous Amperage: 15A (at full throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp continuous
Dimensions: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Lots of others have purchased this item along with the item that you are presently checking out.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An exceptional motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall install. Great for little 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Usage with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm solidified steel shaft, dual ball bearings, integral prop saver for APC E props and integral firewall install flange. Note that the prop saver is sized for APC props. GWS props will require some adjustment to fit properly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance current: 2-6 Amp
NoLoad current / 0.3 Amp
Current capability: 7.5 A/60 s
Max. Effectiveness: 74%
Weight with cables: 19g
Dimensions (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5