Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Designed for usage in electrical RC helis or planes pulling up to
    15 amps
8amp peak, 3amp constant BEC manages high drain servos
Castle Link compatible, Portable Programmer Air Card sold individually-
    CSEM6301
One year limited guarantee through Castle Creations starting at date
    of purchase

CONSISTS OF:
Talon 15 Mini ESC with Receiver Connector and Recommendations

NEEDS:
Motor ports of modeler's choice
Soldering iron for connecting ports

SPECIFICATIONS:
Input Voltage: 2-4S LiPo
Max Continuous Amperage: 15A (at complete throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp constant
Dimensions: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Several others have actually gotten this thing along with the thing that you are currently checking out.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Perfect for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for planes approximately 220 grams (8 oz) utilizing 2 li-poly cells. Really light-weight at 19 grams including important prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and important firewall install. Great for small 3D planes weighing around 6 oz, or aerobatic planes approximately 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, double ball bearings, important prop saver for APC E props and important firewall install flange. Note that the prop saver is sized for APC props. GWS props will need some modification to fit correctly. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. effectiveness current: 2-6 Amp
NoLoad current / 0.3 Amp
Current capacity: 7.5 A/60 s
Max. Performance: 74%
Weight with cable televisions: 19g
Dimensions (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5