Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Designed for use in electrical RC helis or airplanes pulling up to
    15 amps
8amp peak, 3amp continuous BEC deals with high drain servos
Castle Link compatible, Portable Programmer Air Card offered separately-
    CSEM6301
One year limited guarantee through Castle Creations beginning at date
    of purchase

INCLUDES:
Talon 15 Mini ESC with Receiver Adapter and Instructions

REQUIRES:
Motor ports of modeler's choice
Soldering iron for attaching ports

SPECS:
Input Voltage: 2-4S LiPo
Max Continuous Amperage: 15A (at complete throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp continuous
Dimensions: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Numerous others have gotten this item together with the item that you are presently reading about.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for aircrafts as much as 220 grams (8 oz) utilizing 2 li-poly cells. Very light-weight at 19 grams including essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall install. Great for little 3D aircrafts weighing around 6 oz, or aerobatic aircrafts as much as 8 oz. Usage with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm solidified steel shaft, double ball bearings, essential prop saver for APC E props and essential firewall install flange. Note that the prop saver is sized for APC props. GWS props will need some adjustment to fit effectively. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency existing: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cables: 19g
Dimensions (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5