Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even throughout the most severe 3D maneuvers. Talon 25 is meant for use in a lot of 400-size helicopter setups running up to 6S LiPo or your preferred 3D foamie that pulls up to 25 amps. In spite of it's size, it boasts an outstanding 8 amp peak/3 amp constant BEC, keeping even the most draining pipes servos at ease. Talon 25 likewise provides Castle?s industry-leading helicopter functions, not to point out simple programming utilizing the Castle Link USB adapter (voucher for free Castle Link consisted of). Talon 25 pointers the scales at a mere 18 grams!

Talon 25 Requirements:

Input voltage:

MIN: 2S LiPo
MAX: 6S LiPo

Max constant amperage at complete throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (always examine servo draw prior to first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Items needed for operation or setup: Battery and motor ports (offered individually)
Programmability: Totally programmable Castle function set utilizing Castle Link USB adapter (voucher for free Castle Link adapter consisted of in plan) and easily downloadable Castle Link Windows software.
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph air flow of 25C (77F) or cooler air. Controller temperature need to never ever exceed 100C (212F). Surpassing existing or temperature ratings may damage elements and may shorten the life of the ESC. Always verify system existing draw at full-throttle. Decrease load or increase air flow to reduce the ESC?s running temperature.

**Peak indicates amperage sustainable for a lot of servos? existing draw transients. Always verify servo existing draw prior to the first flight of the design.

Regularly purchased with the product that you are presently checking out.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and benefiting from all the technological gains within this remarkable market. Pulse has to do with power & efficiency at a cost that can be afforded. Not does superior power come at a premium price – Pulse delivers all of it in one pulse quickening punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could picture at a cost never ever seen. Adding to the addicting power of Pulse Ultra batteries is the 5C charge rate, allowing you to recharge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, delivering mind numbing power levels that will take your flight to an entirely new level of extreme. If you're trying to find power, you simply discovered it. Pulse delivers intense power for intense pilots, and when it concerns value, Pulse just can't be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D demands!



Requirements:
Voltage: 11.1V
Cell Count: 3S
Capability: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Product Note:
Pulse batteries do not included power leads, and will require completion user to solder their own design of battery port for the battery to be appropriately used. Pulse batteries come with bare leads covered with heat diminish protection, and are ready for the port of option to be soldered to the positive/negative leads.