Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even during the most extreme 3D maneuvers. Talon 25 is meant for usage in many 400-size helicopter setups adding to SIX LiPo or your preferred 3D foamie that pulls up to 25 amps. Regardless of it's size, it boasts a remarkable 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 likewise offers Castle?s industry-leading helicopter functions, not to discuss simple programming using the Castle Link USB adapter (voucher free of charge Castle Link included). Talon 25 pointers the scales at a simple 18 grams!

Talon 25 Requirements:

Input voltage:

MINUTES: 2S LiPo
MAX: SIX LiPo

Max continuous amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp continuous (always inspect servo draw prior to very first flight)

Measurements:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Products needed for operation or installation: Battery and motor connectors (offered individually)
Programmability: Totally programmable Castle feature set using Castle Link USB adapter (voucher free of charge Castle Link adapter included in package) and easily downloadable Castle Link Windows software.
*RC PASTIME APPLICATION RATING: 25 amps throughout of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph air flow of 25C (77F) or cooler air. Controller temperature level need to never go beyond 100C (212F). Exceeding existing or temperature level scores might damage components and might shorten the life of the ESC. Constantly validate system existing draw at full-throttle. Decrease load or boost air flow to reduce the ESC?s running temperature level.

**Peak indicates amperage sustainable for many servos? existing draw transients. Constantly validate servo existing draw before the very first flight of the model.

Frequently gotten with the item that you are presently reviewing.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and benefiting from all the technological gains within this incredible market. Pulse is about power & efficiency at an expense that can be paid for. No longer does premium power come at a premium rate – Pulse delivers all of it in one pulse accelerating punch.

Delivering intense power for your RC applications, Pulse batteries provide everything you could envision at a cost never seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, enabling you to recharge in quick succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, providing mind numbing power levels that will take your flight to a completely new level of extreme. If you're searching for power, you just discovered it. Pulse delivers intense power for intense pilots, when it pertains to value, Pulse simply can't be beat.
Feel the pulse, and grab a new Pulse Ultra Battery for your 3D needs!



Requirements:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Measurements: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not come with power leads, and will need the end user to solder their own style of battery connector for the battery to be correctly utilized. Pulse batteries have bare leads covered with heat diminish defense, and are prepared for the connector of choice to be soldered to the positive/negative leads.