Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even during the most severe 3D maneuvers. Talon 25 is planned for usage in the majority of 400-size helicopter setups running up to SIX LiPo or your favorite 3D foamie that brings up to 25 amps. In spite of it's size, it boasts a remarkable 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 likewise offers Castle?s industry-leading helicopter functions, not to mention easy shows utilizing the Castle Link USB adapter (voucher free of charge Castle Link consisted of). Talon 25 suggestions the scales at a simple 18 grams!

Talon 25 Requirements:

Input voltage:

MINUTES: TWO LiPo
MAX: SIX LiPo

Max continuous amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp continuous (always inspect servo draw prior to first flight)

Measurements:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Products needed for operation or setup: Battery and motor ports (offered separately)
Programmability: Totally programmable Castle feature set utilizing Castle Link USB adapter (voucher free of charge Castle Link adapter consisted of in plan) and easily downloadable Castle Link Windows software.
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 miles per hour airflow of 25C (77F) or cooler air. Controller temperature level should never ever exceed 100C (212F). Surpassing current or temperature level ratings may damage elements and may reduce the life of the ESC. Always confirm system current draw at full-throttle. Reduction load or boost airflow to reduce the ESC?s operating temperature level.

**Peak suggests amperage sustainable for the majority of servos? current draw transients. Always verify servo current draw before the first flight of the design.

Regularly acquired with the item that you are currently reading about.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and benefiting from all the technological gains within this fantastic market. Pulse is about power & performance at a cost that can be managed. Not does premium power come at a premium price – Pulse provides everything in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries deliver everything you might envision at a rate never ever seen. Adding to the addicting power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, providing mind numbing power levels that will take your flight to a completely new level of extreme. If you're trying to find power, you simply discovered it. Pulse provides extreme power for extreme pilots, and when it comes to value, Pulse simply can't be beat.
Feel the pulse, and get a new Pulse Ultra Battery for your 3D needs!



Requirements:
Voltage: 11.1V
Cell Count: THREE
Capability: 860mAh
Discharge Rate: 35C
Charge Rate:
Measurements: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Product Note:
Pulse batteries do not featured power leads, and will require the end user to solder their own design of battery adapter for the battery to be properly used. Pulse batteries have bare leads covered with heat diminish defense, and are all set for the adapter of option to be soldered to the positive/negative leads.