Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even during the most severe 3D maneuvers. Talon 25 is planned for usage in the majority of 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamie that pulls up to 25 amps. Despite it's size, it boasts an outstanding 8 amp peak/3 amp constant BEC, keeping even the most draining pipes servos at ease. Talon 25 also provides Castle?s industry-leading helicopter functions, not to mention easy shows using the Castle Link USB adapter (discount coupon for free Castle Link consisted of). Talon 25 tips the scales at a mere 18 grams!

Talon 25 Requirements:

Input voltage:

MINUTES: TWO LiPo
MAX: 6S LiPo

Max constant amperage at complete throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (constantly check servo draw prior to very first flight)

Measurements:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Products needed for operation or installation: Battery and motor connectors (offered independently)
Programmability: Completely programmable Castle feature set using Castle Link USB adapter (discount coupon for free Castle Link adapter consisted of in package) and easily downloadable Castle Link Windows software.
*RC HOBBY APPLICATION SCORE: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 miles per hour air flow of 25C (77F) or cooler air. Controller temperature need to never exceed 100C (212F). Going beyond existing or temperature scores might harm elements and might shorten the life of the ESC. Constantly confirm system existing draw at full-throttle. Reduction load or boost air flow to decrease the ESC?s running temperature.

**Peak suggests amperage sustainable for the majority of servos? existing draw transients. Constantly verify servo existing draw prior to the very first flight of the design.

Frequently bought with the thing that you are presently reviewing.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and making the most of all the technological gains within this fantastic market. Pulse is about power & efficiency at an expense that can be managed. No longer does premium power come at a premium price – Pulse provides all of it in one pulse speeding up punch.

Delivering extreme power for your RC applications, Pulse batteries provide everything you could picture at a price never seen. Contributing to the addictive power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, providing mind numbing power levels that will take your flight to an entirely brand-new level of extreme. If you're looking for power, you simply discovered it. Pulse provides extreme power for extreme pilots, and when it comes to value, Pulse simply can't be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D needs!



Requirements:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Measurements: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Product Note:
Pulse batteries do not featured power leads, and will need completion user to solder their own design of battery adapter for the battery to be correctly utilized. Pulse batteries have bare leads covered with heat shrink protection, and are ready for the adapter of choice to be soldered to the positive/negative leads.