Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even throughout the most extreme 3D maneuvers. Talon 25 is planned for usage in many 400-size helicopter setups adding to SIX LiPo or your favorite 3D foamie that pulls up to 25 amps. Despite it's size, it boasts an outstanding 8 amp peak/3 amp constant BEC, keeping even the most draining servos at ease. Talon 25 likewise provides Castle?s industry-leading helicopter functions, not to point out easy shows using the Castle Link USB adapter (voucher totally free Castle Link included). Talon 25 tips the scales at a simple 18 grams!

Talon 25 Requirements:

Input voltage:

MINUTES: 2S LiPo
MAX: SIX LiPo

Max constant amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (always inspect servo draw prior to first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Items required for operation or installation: Battery and motor adapters (offered individually)
Programmability: Totally programmable Castle function set using Castle Link USB adapter (voucher totally free Castle Link adapter included in plan) and freely downloadable Castle Link Windows software application.
*RC HOBBY APPLICATION RATING: 25 amps throughout of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph air flow of 25C (77F) or cooler air. Controller temperature level should never ever go beyond 100C (212F). Exceeding present or temperature level scores may harm components and may shorten the life of the ESC. Constantly confirm system present draw at full-throttle. Reduction load or boost air flow to reduce the ESC?s operating temperature level.

**Peak shows amperage sustainable for many servos? present draw transients. Constantly verify servo present draw before the first flight of the model.

Frequently bought with the item that you are presently checking out.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and making the most of all the technological gains within this remarkable market. Pulse has to do with power & efficiency at a cost that can be paid for. No more does exceptional power come at a premium rate – Pulse provides all of it in one pulse quickening punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you might picture at a cost never ever seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, permitting you to charge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, providing mind numbing power levels that will take your flight to a totally new level of extreme. If you're looking for power, you just found it. Pulse provides intense power for intense pilots, when it pertains to value, Pulse merely can't be beat.
Feel the pulse, and grab a new Pulse Ultra Battery for your 3D demands!



Requirements:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not had power leads, and will require the end user to solder their own style of battery connector for the battery to be appropriately utilized. Pulse batteries have bare leads covered with heat shrink security, and are prepared for the connector of choice to be soldered to the positive/negative leads.