Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even during the most extreme 3D maneuvers. Talon 25 is planned for usage in most 400-size helicopter setups running up to 6S LiPo or your preferred 3D foamie that brings up to 25 amps. In spite of it's size, it boasts a remarkable 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also offers Castle?s industry-leading helicopter functions, not to mention simple programming utilizing the Castle Link USB adapter (promo code totally free Castle Link included). Talon 25 suggestions the scales at a simple 18 grams!

Talon 25 Specs:

Input voltage:

MIN: 2S LiPo
MAX: 6S LiPo

Max continuous amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp continuous (constantly check servo draw prior to very first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Items needed for operation or installation: Battery and motor ports (sold individually)
Programmability: Totally programmable Castle feature set utilizing Castle Link USB adapter (promo code totally free Castle Link adapter included in plan) and freely downloadable Castle Link Windows software application.
*RC PASTIME APPLICATION SCORE: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph air flow of 25C (77F) or cooler air. Controller temperature need to never exceed 100C (212F). Exceeding present or temperature ratings may damage parts and may reduce the life of the ESC. Always validate system present draw at full-throttle. Reduction load or boost air flow to reduce the ESC?s operating temperature.

**Peak shows amperage sustainable for most servos? present draw transients. Always validate servo present draw prior to the very first flight of the design.

Frequently acquired with the item that you are currently reviewing.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and benefiting from all the technological gains within this remarkable market. Pulse has to do with power & efficiency at a cost that can be paid for. Not does superior power come at a premium rate – Pulse delivers all of it in one pulse accelerating punch.

Delivering intense power for your RC applications, Pulse batteries provide everything you could envision at a cost never seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to an entirely brand-new level of extreme. If you're trying to find power, you just found it. Pulse delivers intense power for intense pilots, when it comes to value, Pulse merely can't be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D needs!



Specs:
Voltage: 11.1V
Cell Count: 3S
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Product Note:
Pulse batteries do not included power leads, and will require the end user to solder their own style of battery adapter for the battery to be effectively utilized. Pulse batteries include bare leads covered with heat diminish defense, and are all set for the adapter of choice to be soldered to the positive/negative leads.