Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FEATURES:
For 1/18 scale 2 or 4 wheel drive vehicles weighing approximately
    2.25lbs (1.02kg)
Heavy-duty BEC (battery eliminator circuit) manages high-draw
    digital servos
Adjustable settings include;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Vehicle LiPo Cutoff
Programmable Auxiliary Wire (AUX) permits modifications to several
    settings such as torque control and max throttle from a suitable
    transmitter

CONSISTS OF:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (need connector to mate w/selected
    battery, 4mm Castle Creations connectors recommended)
On/Off Switch
Receiver Port
Guideline Pamphlet

REQUIRES:
Compatible Motor and LiPo Battery, recommended battery capacity for
    1/18 scale vehicles is 1500mAh, 30C or greater constant
    discharge

SPECIFICATIONS:
Input Voltage Range: Min. TWO LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Water resistant
Measurements: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector

REMARKS:
Not intended for operation while immersed in liquid. If unit is
    operated in damp conditions, wash with fresh water to get rid of
    dirt or corrosives, then completely dry unit.