Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FUNCTIONS:
For 1/18 scale 2 or 4 wheel drive automobiles weighing as much as
    2.25lbs (1.02kg)
Sturdy BEC (battery remover circuit) manages high-draw
    digital servos
Adjustable settings include;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Automobile LiPo Cutoff
Programmable Auxiliary Wire (AUX) allows modifications to a number of
    settings such as torque control and max throttle from a compatible
    transmitter

CONSISTS OF:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (need port to mate w/selected
    battery, 4mm Castle Creations adapters suggested)
On/Off Switch
Receiver Port
Guideline Brochure

NEEDS:
Compatible Motor and LiPo Battery, suggested battery capacity for
    1/18 scale automobiles is 1500mAh, 30C or greater continuous
    discharge

SPECS:
Input Voltage Range: Minutes. 2S LiPo, Max. THREE, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without port

REMARKS:
Not planned for operation while immersed in liquid. If system is
    run in wet conditions, rinse with fresh water to get rid of
    dirt or corrosives, then completely dry system.