Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FEATURES:
For 1/18 scale 2 or 4 wheel drive automobiles weighing approximately
    2.25pounds (1.02kg)
Heavy-duty BEC (battery remover circuit) handles high-draw
    digital servos
Adjustable settings include;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Auto LiPo Cutoff
Programmable Auxiliary Wire (AUX) permits adjustments to a number of
    settings such as torque control and max throttle from a suitable
    transmitter

CONSISTS OF:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (require connector to mate w/selected
    battery, 4mm Castle Creations ports advised)
On/Off Switch
Receiver Adapter
Instruction Brochure

REQUIRES:
Compatible Motor and LiPo Battery, advised battery capacity for
    1/18 scale automobiles is 1500mAh, 30C or greater continuous
    discharge

SPECIFICATIONS:
Input Voltage Variety: Minutes. 2S LiPo, Max. THREE, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Water resistant
Measurements: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector

COMMENTS:
Not planned for operation while submerged in liquid. If system is
    operated in damp conditions, rinse with fresh water to remove
    dirt or corrosives, then completely dry system.